-
-
HAT/HATA
Applications：
Used to provide insulation protection for cable terminal, load-break switches, power circuit breakers, etc.
Features：
|
Anti Tracking Insulation Tubing
Halogen free
|
|
Tracking resistant
|
|
Minimum fully shrink temperature: 110℃
|
北京丝袜按摩
| Test Items |
Test Method |
Test Requirements |
| Tensile strength |
ASTM D 2671 |
10MPa min. |
| Ultimate elongation |
ASTM D 2671 |
200% min. |
| Tensile strength after |
ASTM D 2671 |
10MPa min. |
| Aging at 150℃ for 168hrs |
| Ultimate elongation after |
ASTM D 2671 |
100% min. |
| Aging at 150℃ for 168hrs |
| Heat shock at 200℃/30min |
ASTM D 2671 |
No cracking, dropping |
| Density |
ASTM D 792 |
1.2~1.3g/cm3 |
| Dielectric strength |
IEC 60243 |
10kV/mm(2.5mm) min. |
| Volume resistivity |
ASTM D 2671 |
1012Ω.cm min. |
| Low temperature flexibility |
ASTM D 2671 Proc.C |
No cracking |
| -40℃/4hrs |
| Permittivity |
ASTM D 150 |
3 (nom.) |
| Tracking resistance |
ASTM D 2303 |
No tracking |
UV resistance.
Ordering Information:
Standard colors:
Red
Special colors:
N/A
Dimensions:
| Continues length tubing (HAT) |
| Size |
As supplied |
After recovered |
Standard length |
Size |
As supplied |
After recovered |
Standard length |
| (mm) |
(mm) |
(mm) |
|
(mm) |
(mm) |
(mm) |
|
| |
D*(Min.) |
d*(Max.) |
w(Min.) |
|
|
D*(Min.) |
d*(Max.) |
w(Min.) |
|
| 19/6 |
19 |
6 |
2.5 |
30m/spool or 0.5-1.5m |
65/21 |
65 |
21 |
3.3 |
30m/spool or 0.5-1.5m |
| 30/10 |
30 |
10 |
2.9 |
30m/spool or 0.5-1.5m |
75/25 |
75 |
25 |
3.5 |
30m/spool or 0.5-1.5m |
| 38/12 |
38 |
12 |
2.9 |
30m/spool or 0.5-1.5m |
85/29 |
85 |
29 |
3.5 |
30m/spool or 0.5-1.5m |
| 40/16 |
40 |
16 |
2.9 |
30m/spool or 0.5-1.5m |
100/40 |
100 |
40 |
4 |
0.5-1.5m |
| 49/16 |
49 |
16 |
2.9 |
30m/spool or 0.5-1.5m |
130/50 |
130 |
50 |
4 |
1.0-1.5m |
| 55/18 |
55 |
18 |
2.9 |
30m/spool or 0.5-1.5m |
|
|
|
|
|
| Cut length tubing (HATA) |
| Size |
As supplied |
After recovered |
Standard length |
Size |
As supplied |
After recovered |
Standard length |
| (mm) |
(mm) |
(mm) |
(m) |
(mm) |
(mm) |
(mm) |
(m) |
| |
D*(Min.) |
d*(Max.) |
w(Min.) |
|
|
D*(Min.) |
d*(Max.) |
w(Min.) |
|
| 30/10 |
30 |
10 |
2.9 |
1.0-1.5 |
65/21 |
65 |
21 |
3.3 |
1.0-1.5 |
| 40/12 |
40 |
12 |
2.9 |
1.0-1.5 |
75/25 |
75 |
25 |
3.5 |
1.0-1.5 |
| 43/14 |
43 |
14 |
2.9 |
1.0-1.5 |
85/29 |
85 |
29 |
3.5 |
1.0-1.5 |
| 49/16 |
49 |
16 |
2.9 |
1.0-1.5 |
100/40 |
100 |
40 |
4 |
1.0-1.5 |
| 55/18 |
55 |
18 |
2.9 |
1.0-1.5 |
130/50 |
130 |
50 |
4 |
1.0-1.5 |
D* = Inner diameter as supplied
d* = Inner diameter after fully recovered
